# Q10531 | How to Configure Auto Power‑On After AC Power Recovery

Learn to set Qotom Q10531 auto‑power‑on after power loss via BIOS: press F2, go to Advanced > POWER > Secondary Power Settings‑After Power Failure, set to Power On, save with F10 for 24/7 unattended operation.

Follow the steps below to enable automatic power-on after power loss:

1. Power on the device and press **F2** to enter the BIOS interface.
2. Click the **Advanced** tab on the top navigation bar to access advanced settings.

![](https://www.qotom.com/article/2026/273-02.png)
3. Click the **POWER** tab on the top navigation bar to enter power management settings.

![](https://www.qotom.com/article/2026/273-03.png)
4. Locate **After Power Failure** in the **Secondary Power Settings** section on the right, then set its value to **Power On**.

![](https://www.qotom.com/article/2026/273-04.png)

![](https://www.qotom.com/article/2026/273-05.png)
5. Press **F10** to save changes and restart the device to take effect.

## Related Products

- [Mini PC Q10531 S19 Series](https://www.qotom.com/products/q10531-s19)
- [Mini PC Q10531 S21 Series](https://www.qotom.com/products/q10531-s21)

Updated: 2026-09-29T04:20:56.88945+00:00

Source: https://www.qotom.com/support/q10531-how-to-configure-auto-power-on-after-ac-power-recovery